Filter or EQ? Both turn the sound down, but they are not the same
17 Nov 2026
Everyone who starts DJing asks the same question at some point: "When I turn the filter the sound goes down, when I turn the EQ the sound goes down too. What's the difference?" It's a fair question, because both reduce part of the sound. But they are completely different tools and they're used at completely different moments in the booth. In this article we unpack the difference from the lesson note video narrated by Gwen de Lien, with examples and booth practice.
EQ: three separate knobs, fixed bands
Every channel on the mixer has three EQ knobs: HI, MID and LOW. Each controls a frequency band whose position is fixed:
- LOW: the bass and the body of the kick,
- MID: the vocals and the melody,
- HI: hi-hats, cymbals and brightness.
When you turn a knob, only the level of that band changes; the band itself doesn't move. Cut the LOW and the bass goes down while vocals and hi-hats stay as they are. That makes EQ a balance tool: it lets you decide which frequencies come from which track while two tracks play together.
Filter: one knob, a moving cutoff
The filter is usually a single knob per channel, and in the middle (twelve o'clock) it does nothing. Turn it and a cutoff point comes in, and that point moves with the knob:
- Turn left: low pass. The name means "let the low frequencies pass". The highs close, the sound gets muffled, as if the music were coming from the next room. The further left you turn, the lower the cutoff slides, until only the bass remains.
- Turn right: high pass. "Let the high frequencies pass". The lows disappear, the sound gets thinner; kick and bass vanish and the hi-hats and the top of the vocal remain.
The magic of the filter is that movement itself. As the cutoff slides, the ear hears it as tension or opening up. Many filters also have resonance: the area right around the cutoff is slightly emphasised, which makes the sweep more audible.
Not the same: an example
Say you want to reduce the bass in the playing track.
- Cut the LOW and the bass goes down while everything else stays the same. The sound is balanced and steady.
- Remove it with a high pass and the cutoff climbs as you turn: first the bass goes, then the body of the kick, then the low mids. The sound thins out and moves.
The first is a mixing decision, the second is a performance move.
When do you use which?
Use EQ for:
- the bass swap between two tracks (the heart of the transition),
- balancing a recording that is too bright or too bass-heavy,
- deciding who speaks in which frequency during the transition.
Use the filter for:
- building tension in a break,
- "pushing a track away" and taking it off the stage,
- creating a short effect moment that prepares the floor.
In short: balance and the bass swap with EQ, tension and movement with the filter.
Tip: open the filter slowly in the break
In the break of a track (where the kick drops out and the floor breathes), take the filter slightly into low pass. Then, towards the drop, over the last 8 or 16 beats, slowly bring it back to the middle. As the closed, muffled sound opens up, the floor feels the moment coming; when the drop lands, the full-range sound hits harder. You can do the same with a high pass: pull the bass out during the break and give it back all at once on the drop.
Common mistakes
- Leaving the filter on: a slightly turned filter leaves the whole track muffled or thin without you noticing. Return the filter to the middle after every move.
- Doing the bass swap with the filter: pulling the bass with a high pass also changes the character of the track during the transition. The bass swap is EQ's job.
- Filtering constantly: a filter sweep in every transition quickly becomes repetitive for the floor. Use it selectively to keep its impact.
- Forgetting resonance: some mixers have a strong filter resonance that can create a sharp whistle on a loud track. Try it in headphones first.
At Institute of Sound
You learn EQ and filter on Pioneer DJ mixers by trying them one after the other on the same track: first you hear the difference, then you decide with your own ears which one to use when. Turn it up, hear the difference.
Contact us for details.
Narration: Gwen de Lien



